Durability
2 posters
Page 1 of 1
Durability
Durability
* The standard connectors were designed to be robust. Many previous connector designs were fragile, specifying embedded component pins or other delicate parts which proved vulnerable to bending or breakage, even with the application of modest force. The electrical contacts in a USB connector are protected by an adjacent plastic tongue, and the entire connecting assembly is usually protected by an enclosing metal sheath. Although meant to reinforce the metal connections, the construction and materials used in the plastic tongue can actually decrease the life of the connector, as some manufacturers use hard, brittle plastics that easily break when bent.[citation needed]
* The connector construction always ensures that the external sheath on the plug makes contact with its counterpart in the receptacle before any of the four connectors within make electrical contact. The external metallic sheath is typically connected to system ground, thus dissipating damaging static charges. This enclosure design also provides a (moderate) degree of protection from electromagnetic interference to the USB signal while it travels through the mated connector pair (the only location when the otherwise twisted data pair travels in parallel). In addition, because of the required sizes of the power and common connections, they are made after the system ground but before the data connections. This type of staged make-break timing allows for electrically safe hot-swapping, a common practice in the design of connectors in the aerospace industry.[citation needed]
* The newer Micro-USB receptacles are designed for up to 10,000 cycles of insertion and removal between the receptacle and plug, compared to 1500 for the standard USB and 5000 for the Mini-USB receptacle. This is accomplished by adding a locking device and by moving the leaf-spring connector from the jack to the plug, so that the most-stressed part is on the cable side of
Hand Towel Machine
home decor
* The standard connectors were designed to be robust. Many previous connector designs were fragile, specifying embedded component pins or other delicate parts which proved vulnerable to bending or breakage, even with the application of modest force. The electrical contacts in a USB connector are protected by an adjacent plastic tongue, and the entire connecting assembly is usually protected by an enclosing metal sheath. Although meant to reinforce the metal connections, the construction and materials used in the plastic tongue can actually decrease the life of the connector, as some manufacturers use hard, brittle plastics that easily break when bent.[citation needed]
* The connector construction always ensures that the external sheath on the plug makes contact with its counterpart in the receptacle before any of the four connectors within make electrical contact. The external metallic sheath is typically connected to system ground, thus dissipating damaging static charges. This enclosure design also provides a (moderate) degree of protection from electromagnetic interference to the USB signal while it travels through the mated connector pair (the only location when the otherwise twisted data pair travels in parallel). In addition, because of the required sizes of the power and common connections, they are made after the system ground but before the data connections. This type of staged make-break timing allows for electrically safe hot-swapping, a common practice in the design of connectors in the aerospace industry.[citation needed]
* The newer Micro-USB receptacles are designed for up to 10,000 cycles of insertion and removal between the receptacle and plug, compared to 1500 for the standard USB and 5000 for the Mini-USB receptacle. This is accomplished by adding a locking device and by moving the leaf-spring connector from the jack to the plug, so that the most-stressed part is on the cable side of
Hand Towel Machine
home decor
meodingu- Member
- Posts : 153
BDB Credits : 421
Rep : 0
Age : 39
Location : vn hp
Job/hobbies : studient
Re: Durability
* The newer Micro-USB receptacles are designed for up to 10,000 cycles of insertion and removal between the receptacle and plug, compared to 1500 for the standard USB and 5000 for the Mini-USB receptacle. This is accomplished by adding a locking device and by moving the leaf-spring connector from the jack to the plug, so that the most-stressed part is on the cable side of
Lady Gaga Tickets
Loan
Lady Gaga Tickets
Loan
lunamoonfang- Member
- Posts : 126
BDB Credits : 255
Rep : 0
Age : 32
Location : Vietnam
Job/hobbies : gasdasdf
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
Fri Mar 23, 2012 11:58 am by ailsaparker15
» How can i play texan holden poker in my nokia C3-00?
Mon Nov 28, 2011 1:15 pm by Carstensen
» Pet Franchisee
Mon Nov 14, 2011 2:07 pm by ailsaparker15
» Anyone think these are good for my forum?
Mon Nov 14, 2011 12:42 pm by ailsaparker15
» hello everyone
Thu Nov 03, 2011 7:49 am by ClintonSparano
» Features of FM Antenna
Tue Oct 25, 2011 10:17 am by ailsaparker15
» Inventory Management Software for Effective Warehouse Goods Management
Fri Oct 21, 2011 7:34 am by ailsaparker15
» features of Half log siding system
Thu Oct 13, 2011 11:22 am by ailsaparker15
» Things to know before installing a solar power system.
Sat May 28, 2011 1:23 pm by JaneAlbert